Oct 19, 2008 · Nowadays when the typical man in the street says "Loctite" he more likely means one of the company's line of cyanoacrylics - entirely different product from the threadlockers, with different …

Habasit Fixol for the core and rubber glue for the outer (the rubber glue is the stuff they use to repair tyres.) Belt will require scarfing, then lining up the two scarfed ends together in between aluminium …

Jun 25, 2019 · We have used super glue to bond steel to non-magnetic metals for surface grinding. The secret was to be sure to allow the glue to set at least 1/2 - 1 hour before use.

I remember something akin to this tape. In the old days of 'knob and tube' electrical wiring, whilst making up splices etc, after soldering the solid conductor copper, we wrapped this rubber tape very tight, and …

Apr 24, 2010 · I need to glue a hockey puck to aluminium. The puck's center is bored out to 40 mm and it goes over a round bar. What kind of glue is suitable? I was thinking about either epoxy or Liquisole. …

Nov 3, 2025 · I'm partial to a rounded or octagonal oval shape in wood rather than the often seen round rubber over metal round bar handle. That might be worth considering. And would bring me back to …

The doco on ChemSet type anchors does seem impressive ... but I (like you) feel uncomfortable with glue holding big pulls when not necessary. The site below may assist some in giving lead to the base …

I can't find out what this material is, but it feels like some kind of thin plastic or hard rubber. I'm guessing its some kind of tough double sticky tape, but I want to use the right thing when I put it together. …

May 25, 2017 · For example, when drilling and tapping the plastic for a metal screw, I grind the points off of the tap and make it flat crested. This makes the plastic part a "Nylock type" fastener that can be …

Apr 1, 2017 · I had this problem. Flipped the magnet and now it works! I had put the magnet in a loose counterbore with rubber cement so it came off and went back on pretty easily.